Pond Aeration & Fountains

Fountain and Aerator Service and Equipment

Aeration and fountains are an important part of a healthy pond.  Ponds can become problematic when the water is not being circulated.  Stagnant water produces an ideal environment for mosquitoes, weeds, and algae to thrive in a pond.  Aerators and fountains keep the water moving.  However, these units do differ from each other and it is important to know the difference before purchasing a unit. 

Fountains are a focal point in most ponds.  Fountains shoot up to 15-30 feet in the air depending on the model and spray pattern.  These units move water and increase oxygen levels on the surface, but leave deep spots in the pond unchanged.  Fountains plug into an electric source on the shoreline.  The cable runs from the fountain float to the electric source.  There are several eye hooks on the float to anchor the float in place. 

If fish health and oxygen levels are a major concern, then you may want to consider an aerator.  Unlike fountains, the aerator diffuser sits on the pond floor and pushes oxygenated air to the surface of the water.  Aerators create a ripple effect on the surface of the water.  These units have two lines that come off the pump (electrical cable and airline).  The pump sits on the shore line and has 6 feet of electrical cable.  Therefore, it is important that your electrical source is close to the edge of the pond.  The airline will runs from the pump on the shore to the diffuser on the pond floor and should be anchored. 

If you already have a pond fountain we have service programs to remove, clean, and store from season to season that can be added on to any pond management package.  If you are interested in purchasing an Aerator or fountain, Pond Champs has a variety of units to choose from. 

Pricing

  • FOUNTAIN SERVICE Installation
  • $200.00
  • Our techs start installing fountains in March dependent on weather.  Have a new fountain? Hire our team to get in installed and looking good.

  • FOUNTAIN SERVICE Removal
  • $250.00
  • Removal begins the first week of November

  • FOUNTAIN SERVICE Total Package
  • $400.00
  • Removal, cleaning, and storage for 1 fountain.  Additional fountains may qualify for a quantity discount.

FOUNTAINS

½ HP 115V Fountain System

  • 1/2 HP Complete Pre-assembled Pond/Fountain Pump System 115V
  • Sprays 15′ high and 30′ in diameter. Minimum operation depth is 5′
  • 3 interchangeable nozzles
  • 100′ submersible fountain cable with G.F.C.I outlet.
  • Pump flow = 4900 gallons per hour
  • 3-light kit available

 

½ HP 230V Fountain System

  • 1/2HP Complete Pre-assembled Pond/Fountain Pump System 230V
  • Sprays 15′ high and 30′ in diameter. Minimum operation depth is 5′
  • 3 interchangeable nozzles
  • Minimal care and maintenance
  • 100′ submersible fountain cable with G.F.C.I outlet.
  • Pump flow = 4900 gallons per hour
  • 3-light kit available

¾ HP 230V Fountain System

  • 3/4HP Complete Pre-assembled Pond/Fountain Pump System 230V
  • Sprays 22′ high and 32′ in diameter. Minimum operation depth is 5′
  • 3 interchangeable nozzles
  • 100′ submersible fountain cable with G.F.C.I outlet.
  • Pump flow = 5825 gallons per hour
  • 3-light kit available

 

1 HP 230V Fountain System

  • 1HP Complete Pre-assembled Pond/Fountain Pump System 230V
  • Sprays 24′ high and 46′ in diameter. Minimum operation depth is 5′
  • 3 interchangeable nozzles
  • Minimal care and maintenance
  • 100′ submersible fountain cable with G.F.C.I outlet.
  • Pump flow = 6150 gallons per hour
  • 3-light kit available

AERATORS

CB 40: For ¼ Acre Pond

  • 10′ airline
  • 1 1/4″ SST hose clamp,
  • Anchor (sand not included)
  • 8″ diffuser
  • 90 degree 3/4″ FPT
  • 1/2 Insert fitting 3/4″ MPT

 

CB 60: For ½ Acre Pond

  • 20′ airline
  • 1 1/4″ SST hose clamp,
  • Anchor (sand not included)
  • 12″ diffuser
  • 90 degree 3/4″ FPT
  • 1/2 Insert fitting 3/4″ MPT

CB 80: For 1 Acre Pond

  • 25′ airline
  • 1 1/4″ SST hose clamp,
  • Anchor (sand not included)
  • 2-10″ diffusers
  • 90 degree 3/4″ FPT
  • 1/2 Insert fitting 3/4″ MPT

 

CB 120: For 2 Acre Pond

  • 30′ airline
  • 1 1/4″ SST hose clamp,
  • Anchor (sand not included)
  • 2-12″ diffusers
  • 90 degree 3/4″ FPT
  • 1/2 Insert fitting 3/4″ MPT